Description:
The Linksys Wireless-G Exterior Access Point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. This weatherproof Access Point creates a "wireless bubble" in exterior spaces, like patios, pool areas, and outdoor caf?s. Power over Ethernet support makes it easy to install, and you can create multiple SSIDs that connect to individual VLANs to keep your traffic separated.
It's also perfect for use as a bridge, a kind of "cable-less cable" to connect remote areas together. Maybe your warehouse is in a separate building from your offices. Or maybe you need to connect the separate buildings of a college campus. With one Wireless-G Exterior Access Point on each building, you're connected at 54Mbps - with no cable to run. The exterior-rated case protects the access point, and contains an internal antenna.
Manufactured by: LINKSYS
Model/Part : WAP54GPE
Device Type: Wireless access point
RAM Installed ( Max ): 16 MB
Flash Memory Installed (Max): 8 MB flash
Form Factor: External
Connectivity Technology: Wireless
Data Transfer Rate: 54 Mbps
Line Coding Format: DBPSK, DQPSK, CCK, BPSK, QPSK, OFDM
Data Link Protocol: IEEE 802.11b, IEEE 802.11g
Spread Spectrum Method: OFDM, DSSS
Remote Management Protocol: SNMP 1, SNMP 2, HTTPS
Status Indicators: Link activity, power, link OK
Features: DHCP support, MAC address filtering, firmware upgradable
Encryption Algorithm: SHA, MD5, AES, 128-bit WEP, 64-bit WEP, TLS, PEAP, TTLS, TKIP, WPA
Authentication Method: RADIUS, Radio Service Set ID (SSID)
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x
Antenna: Internal integrated
Antenna Qty: 1
Directivity: Directional
Gain Level: 8 dBi
Interfaces: 1 x network / power - Ethernet 10Base-T/100Base-TX - RJ-45 1 x network - Radio-Ethernet - N-Series connector
Power Over Ethernet (PoE): Yes
Width: 6.4 in
Depth: 2.2 in
Height: 8.1 in