Description:
Adaptec ARO-1130B RAID option card optimizes performance and provides fault-tolerant storage for entry-level servers. Systems with embedded Adaptec AIC-7895 or AIC-7880 Ultra SCSI chips can be easily upgraded from SCSI to RAID by installing this low-cost option card. This card is ideal for improving data availability without sacrificing performance in systems with a PCI-RAIDport II connector on the system motherboard. The ARO-1130B RAID option card utilizes the already embedded Ultra SCSI chips as RAID channels to reduce complexity and cost. It supports Wide Ultra SCSI, Fast/Wide SCSI and SCSI devices from major vendors and works under Windows NT and Netware operating systems.
Computer Bus: 32-bit PCI Local Bus plus RAIDport II connector
Interface Protocol: Bus Master DMA
Host Bust Data Transfer Rate: Up to 133 MByte/sec burst rate
SCSI Synchronous Data Rate:
AIC-7895: up to 80 MByte/sec (40 MByte/sec per channel)
AIC-7880: up to 40 MByte/sec per channel
Device Protocol: Ultra SCSI, Fast, and Wide (8- and 16-bit) 20 MHz
Advanced Hardware Features : 60 NS EDO DIMM memory
Flash upgradable firmware and BIOS
SCSI Channels: AIC-7895 or AIC-7880 motherboard UltraSCSI chip connected to RAIDport II slot
Device Support: Up to 15 HDD/non-HDD SCSI devices per motherboard channel
Array Support:
Drives can be configured for RAID levels 0, 1, 0/1, and 5.
Drives can also be supported in non-array configurations
Operating System Support: Windows NT 4.0, NetWare 4.11 and 3.12
Remote Management: Windows 3.x, Windows 95, Windows NT 4.0 and 3.51
Dimensions: 4.200" x 6.875" (10.668cm x 17.463cm)
Power Consumption: 5V +/- 5%
Temperature: Operating: 5?C to 55?C
Storage: -55?C to 95?C
Humidity: Operating: 20% to 90%, non condensing
CABLES
