Description:
Cisco EtherSwitch HWICs are 10/100BaseT Layer 2 Ethernet switches with Layer 3 routing capability. (Layer 3 routing is forwarded to the host, and is not actually performed at the switch.). Traffic between different VLANs on a switch is routed through the router platform. Any one port on a Cisco EtherSwitch HWIC may be configured as a stacking port to link to another Cisco EtherSwitch HWIC or EtherSwitch network module in the same system. An optional power module can also be added to provide inline power for IP telephones.
Manufactured by: CISCO
Model/Part #: HWIC-4ESW
Device Type Switch
Enclosure Type Plug-in module
Ports Qty 4 x Ethernet 10Base-T, Ethernet 100Base-TX
Data Transfer Rate 100 Mbps
Data Link Protocol Ethernet, Fast Ethernet
Remote Management Protocol SNMP 1, SNMP 2, Telnet, SNMP 3
Connectivity Technology Wired
Communication Mode Half-duplex, full-duplex
Switching Protocol Ethernet
Status Indicators Port status
Features Flow control, full duplex capability, layer 2 switching, auto-sensing per device, auto-negotiation, trunking, VLAN support, auto-uplink (auto MDI/MDI-X)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.1x
Interfaces 4 x network / power - Ethernet 10Base-T/100Base-TX - RJ-45
Compatible Slots 1 x expansion slot
Power Over Ethernet (PoE) Yes
Width 3.1 in
Depth 4.7 in
Height 0.7 in
Weight 0.2 lbs
CABLES
NETWORKING
• 3COM NETWORKING
